Free Shipping on all orders over $75.
All Products
FILTER RESULTS
Clear All
All
600 Volts
All
300 Ampere, 235 Ampere
All
Black
All
4/0-#2 American-Wire-Gauge
All
2.60 inches
All
2.20 inches
All
Black
All
#3-4/0 AWG
1/0-2 AWG
1/0-8 AWG
350 MCM-1/0 AWG
500 MCM-2/0 AWG
750-10 AWG
All
90 °C
Dry Location
Outdoor/Wet
All
Thermoplastic
All
55 Amperes
CU - 190 Ampere, AL - 150 Ampere
CU - 190, AL - 150 Amperes
CU - 405 Ampere, AL - 315 Ampere
CU - 570 Ampere, AL - 445 Ampere
All
Fiber Reinforced Thermal Plastic
Thermoplastic
All
Clamp
Easy to install and no special tools required.
All
194° F
194°F
All
600 Volts

Insulated Piercing Connectors

View as Grid List
NSi IPCS1002 Insulation Piercing Connector 1/0-2 AWG
  • Safe to use, versatile and reliable.
  • No need to strip wire and totally insulated.
  • No tape or cover needed.
  • No contact at any point with a live part.
  • Can be installed on energized conductors.
  • No spacer required between connections.
  • Exclusive “turbo spacer” keeps tap side open while main conductor is being tightened.
  • No need for a third hand to install.
  • Watertight and corrosion-free.
  • Connection sealed by a rubber grommet.
  • No migration of water.
  • No contamination between main and tap.
  • Connectors handle a large wire range of #14awg to 750mcm.
  • Double shear-head bolts ensure perfect connection every time Hot spots eliminated.
  • Can be used as a splice or a tap.
  • Easy to install and no special tools required.
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications.
  • Suitable for solid and/or stranded wires.
  • 4 sizes are approved for use with bare wire (from 4/0 to #10) - these connectors come with a blue insert which re-creates the insulation and avoids any damage to the conductor.
  • *Cannot be used with bare wire or as a splice.
  • **Cannot be used with bare wire. All sizes can be installed on energized main conductor, however, the tap must not be under load.
  • Not recommended for use with extra-flexible cables. Not approved for submersible applications.
NSi IPCS1010 Insulation Piercing Connector 1/0-1/0 AWG
  • Safe to use, versatile and reliable.
  • No need to strip wire and totally insulated.
  • No tape or cover needed.
  • No contact at any point with a live part.
  • Can be installed on energized conductors.
  • No spacer required between connections.
  • Exclusive “turbo spacer” keeps tap side open while main conductor is being tightened.
  • No need for a third hand to install.
  • Watertight and corrosion-free.
  • Connection sealed by a rubber grommet.
  • No migration of water.
  • No contamination between main and tap.
  • Connectors handle a large wire range of #14awg to 750mcm.
  • Double shear-head bolts ensure perfect connection every time Hot spots eliminated.
  • Can be used as a splice or a tap.
  • Easy to install and no special tools required.
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications.
  • Suitable for solid and/or stranded wires.
  • 4 sizes are approved for use with bare wire (from 4/0 to #10) - these connectors come with a blue insert which re-creates the insulation and avoids any damage to the conductor.
  • *Cannot be used with bare wire or as a splice.
  • **Cannot be used with bare wire. All sizes can be installed on energized main conductor, however, the tap must not be under load.
  • Not recommended for use with extra-flexible cables. Not approved for submersible applications.
NSi IPCS3535 Insulation Piercing Connector 350-350 MCM
  • Safe to use, versatile and reliable.
  • No need to strip wire and totally insulated.
  • No tape or cover needed.
  • No contact at any point with a live part.
  • Can be installed on energized conductors.
  • No spacer required between connections.
  • Exclusive “turbo spacer” keeps tap side open while main conductor is being tightened.
  • No need for a third hand to install.
  • Watertight and corrosion-free.
  • Connection sealed by a rubber grommet.
  • No migration of water.
  • No contamination between main and tap.
  • Connectors handle a large wire range of #14awg to 750mcm.
  • Double shear-head bolts ensure perfect connection every time Hot spots eliminated.
  • Can be used as a splice or a tap.
  • Easy to install and no special tools required.
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications.
  • Suitable for solid and/or stranded wires.
  • 4 sizes are approved for use with bare wire (from 4/0 to #10) - these connectors come with a blue insert which re-creates the insulation and avoids any damage to the conductor.
  • *Cannot be used with bare wire or as a splice.
  • **Cannot be used with bare wire. All sizes can be installed on energized main conductor, however, the tap must not be under load.
  • Not recommended for use with extra-flexible cables. Not approved for submersible applications.
NSi IPCS4002 4/0-3AWG Piercing Connector, Black
  • No need to strip wire and totally insulated tape or cover needed
  • Can be installed on energized conductors
  • Watertight and corrosion-free
  • Connection sealed by a rubber grommet and handle a large wire range
  • Easy to install and no special tools required
NSi IPCS4020 4/0-2AWG Piercing Connector, Black
  • No need to strip wire and totally insulated tape or cover needed
  • Can be installed on energized conductors
  • Watertight and corrosion-free
  • Connection sealed by a rubber grommet and handle a large wire range
  • Easy to install and no special tools required
NSi IPCS5040 Insulation Piercing Connector 500-4/0 AWG
  • Safe to use, versatile and reliable.
  • No need to strip wire and totally insulated.
  • No tape or cover needed.
  • No contact at any point with a live part.
  • Can be installed on energized conductors.
  • No spacer required between connections.
  • Exclusive “turbo spacer” keeps tap side open while main conductor is being tightened.
  • No need for a third hand to install.
  • Watertight and corrosion-free.
  • Connection sealed by a rubber grommet.
  • No migration of water.
  • No contamination between main and tap.
  • Connectors handle a large wire range of #14awg to 750mcm.
  • Double shear-head bolts ensure perfect connection every time Hot spots eliminated.
  • Can be used as a splice or a tap.
  • Easy to install and no special tools required.
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications.
  • Suitable for solid and/or stranded wires.
  • 4 sizes are approved for use with bare wire (from 4/0 to #10) - these connectors come with a blue insert which re-creates the insulation and avoids any damage to the conductor.
  • *Cannot be used with bare wire or as a splice.
  • **Cannot be used with bare wire. All sizes can be installed on energized main conductor, however, the tap must not be under load.
  • Not recommended for use with extra-flexible cables. Not approved for submersible applications.
NSi IPCS7501 Insulation Piercing Connector 750-10 AWG
  • Safe to use, versatile and reliable
  • No need to strip wire and totally insulated
  • No tape or cover needed
  • No contact at any point with a live part
  • Can be installed on energized conductors
  • No spacer required between connections
  • Exclusive “turbo spacer” keeps tap side open while main conductor is being tightened
  • No need for a third hand to install
  • Watertight and corrosion-free
  • Connection sealed by a rubber grommet
  • No migration of water
  • No contamination between main and tap
  • Connectors handle a large wire range of #14awg to 750mcm
  • Double shear-head bolts ensure perfect connection every time Hot spots eliminated
  • Can be used as a splice or a tap
  • Easy to install and no special tools required
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications
  • Suitable for solid and/or stranded wires
  • 4 sizes are approved for use with bare wire (from 4/0 to #10) - these connectors come
  • With a blue insert which re-creates the insulation and avoids any damage to the conductor
  • *Cannot be used with bare wire or as a splice
  • **Cannot be used with bare wire. All sizes can be installed on energized main conductor, however, the tap must not be under load
  • Not recommended for use with extra-flexible cables. Not approved for submersible applications
CHAT
For website and online Bill Pay questions.
Contact Us    1-866-634-9853
Support hours are 6:00am CST to 5:00pm CST.